TLP597A 2000-08-09 1/6 toshiba photocoupler photo relay t l p 5 9 7 a telecommunication data acquisition measurement instrumentation the toshiba TLP597A consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-mos fet in a six lead plastic dip package (dip6). the TLP597A is a bi-directional switch can replace mechanical relays in many applications. features 6 pin dip (dip6) 1-form-a peak off-state voltage : 60 v (min.) trigger led current : 3 ma (max.) on-state current : 500 ma (max.) on-state resistance : 2 (max.) isolation voltage : 2500 vrms (min.) ul recognized : ul1577, file no. e67349 pin configuration (tol view) 1 : anode 2 : cathode 3 : n.c. 4 : drain d1 5 : source 6 : drain d2 1 2 3 6 5 4 schematic 1 2 6 5 4 unit: mm jedec eiaj toshiba 11-7a8 weight: 0.4 g
TLP597A 2000-08-09 2/6 maximum ratings (ta 25c) characteristic symbol rating unit forward current i f 50 ma forward current derating (ta 25c) i f /c 0.5 ma/c peak forward current (100 s pulse, 100 pps) i fp 1 a reverse voltage v r 5 v led junction temperature t j 125 c off-state output terminal voltage v off 60 v a connection 500 b connection 500 on-state rms current c connection i on 1000 ma a connection 5.0 b connection 5.0 on-state current derating (ta 25c) c connection i on /c 10.0 ma/c detector junction temperature t j 125 c operating temperature range t opr 40~85 c storage temperature range t stg 55~125 c lead soldering temperature (10 s) t sol 260 c isolation voltage (ac, 1 minute, r.h. 60%) (note1) bv s 2500 vrms (note1) :device considered a two-terminal device : pins 1, 2 and 3 shorted together, and pins 4, 5 and 6 shorted together. recommended operating conditions characteristic symbol min. typ. max. unit supply voltage v dd 48 v forward current i f 5 7.5 25 ma on-state current i on 400 ma operating temperature t opr 20 65 c circuit connections 1 2 3 6 5 4 ac or dc load 1 2 3 6 5 4 dc load 1 2 3 6 5 4 dc load a connection b connection c connection
TLP597A 2000-08-09 3/6 individual electrical characteristics (ta 25c) characteristic symbol test condition min. typ. max. unit forward voltage v f i f 10 ma 1.0 1.15 1.3 v reverse current i r v r 5 v 10 a led capacitance c t v 0, f 1 mhz 30 pf off-state current i off v off 60 v 1 a detector capacitance c off v 0, f 1 mhz 130 pf coupled electrical characteristics (ta 25c) characteristic symbol test condition min. typ. max. unit trigger led current i ft i on 500 ma 3 ma close led current i fc i off 100 a 0.1 ma a connection i on 500 ma, i f 5 ma 1 2 b connection i on 500 ma, i f 5 ma 0.5 1 on-state resistance c connection r on i on 1000 ma, i f 5 ma 0.25 isolation characteristics (ta 25c) characteristic symbol test condition min. typ. max. unit capacitance input to output c s v s 0 v, f 1 mhz 0.8 pf isolation resistance r s v s 500 v, r.h. 60% 5 10 10 10 14 ac, 1 minute 2500 ac, 1 second (in oil) 5000 vrms isolation voltage bv s dc, 1 minute (in oil) 5000 vdc switching characteristics (ta 25c) characteristic symbol test condition min. typ. max. unit turn-on time t on 0.6 2 turn-off time t off r l 200 (note 2) v dd 20 v, i f 5 ma 0.1 1 ms turn-on time t on 0.3 1 turn-off time t off r l 200 (note 2) v dd 20 v, i f 10 ma 0.1 1 ms (note 2) : switching time test circuit v out i f t on t off 90% 10% 6 r l v dd v out 4 1 2 i f
TLP597A 2000-08-09 4/6 ambient temperature ta( ) i - ta allowable forward current i (ma) f f -20 0 20 40 60 80 100 120 0 20 40 60 80 100 ambient temperature ta( ) i - ta on-state current i (ma) on on a , b c o n n e c t i o n c c o n n e c t i o n -20 0 20 40 60 80 100 120 0 200 400 600 800 1000 1200 forward voltage v v) i - v forward current i (ma) f f f f 0.6 0.8 1 1.2 1.4 1.6 1.8 0.1 1 10 100 0.3 0.5 3 5 50 30 on-state voltage v (v) i - v on-state current i (ma) on on ta=25 ,i =5ma a connection f on on -1 -0.5 0 0.5 1 -750 -500 -250 0 250 500 750 ambient temperature ta( ) r - ta on-state resistance r ( ) on on i =500ma i =5ma f on -20 0 20 40 60 80 100 0 0.5 1 1.5 2 ambient temperature ta( ) ift - ta trigger led current i =500ma t< 1 s on ift(ma) -40-20 0 20406080100 0 1 2 3 4 5
TLP597A 2000-08-09 5/6 forward current i (ma) ton,toff - i switching time ton,toff( s) ta=25 v =20v, r =200 dd l f f t o n t o f f 1 10 100 5 3 30 50 100 1000 2000 30 50 300 500 ambient temperature ta( ) ton,toff - ta switching time ton,toff( s) v =20v, r =200 i =5ma dd f l t o n t o f f -40 -20 0 20 40 60 80 100 0 200 400 600 800 1000 ambient temperature ta( ) i - ta off-state current i (na) off off v =60v off -20 0 20 40 60 80 100 0.1 1 10 100
TLP597A 2000-08-09 6/6 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. gallium arsenide (gaas) is a substance used in the products described in this document. gaas dust and fumes are toxic. do not break, cut or pulverize the product, or use chemicals to dissolve them. when disposing of the products, follow the appropriate regulations. do not dispose of the products with other industrial waste or with domestic garbage. the products described in this document are subject to the foreign exchange and foreign trade laws. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707ebc restrictions on product use
|
